Security Settings - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 8.0 Jun. 2008
(3) SSL
• It will be displayed when certificate is issued from PageScope Web Connection.
Functions • To set whether to encrypt access from other systems by SSL when using Page
Scope Data Administrator.
Use • To encrypt access by SSL from other systems using OpenAPI.
Setting/ • The default setting is OFF.
Procedure
(4) Authentication
Functions • To set whether to authenticate access of other systems which uses OpenAPI when
using PageScope Data Administrator.
Use • To set authentication of the access from other systems using OpenAPI.
Setting/ • The default setting is OFF.
Procedure
• When setting to [ON], enter the login name and the password to be set.
B. Call Remote Center
• It will be displayed when the setup at the CS Remote Care center is complete.
Functions
• To call the CS Remote Care center from the administrator, when the CS Remote
Care setup is complete.
Use
Setting/
For details, see "CS Remote Care."
See P.469
Procedure
8.6.10

Security Settings

A. Administrator Password
Functions • To set/change the administrator password.
Use • To change the administrator password.
Setting/ • Enter the administrator password on the on-screen keyboard.
Procedure
Current Password : Enter the current administrator password
New Password
Re-Input Password : Re-enter the new administrator password
NOTE
• When selecting [Utility] → [Administrator Settings] → [Security Setting] →
[Security Details] leads to [Password Rules] being ON, the password with the
same letters, the password which is same as the previous one and the pass-
word of less than eight digits cannot be changed.
ON
ON
: Enter the new administrator password to be used
8. Utility Mode
"OFF"
"OFF"
415