Konica Minolta bizhub C650 Service Manual page 461

8. Utility Mode
F. PBX Connection Setting
Functions • To set whether to use PBX connection setting or not.
Use • This will be used when the machine is connected to PBX line.
Setting/ • The default setting is No.
Procedure
• When set to [Yes], enter the external number between 0 and 9999.
G. Report Settings
(1) Activity Report
• It will not be displayed when the following setting shows that vendor or authentication
device is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
Functions • To set whether to print out the activity report or not, and also the timing for printing.
Use • To print out the activity report.
Setting/ • The default setting is ON.
Procedure
• When this setting is set to ON, make the setting of Output Setting.
• The default setting is Every 100 Comm.
(2) TX Result Report
Functions • To set whether to print out the TX report, and also the timing for printing.
Use • To print out the TX report.
Setting/ • The default setting is If TX Fails.
Procedure
(3) Sequential TX Report
Functions • To set whether to print out the sequential TX report or not.
Use • To print out the sequential TX report.
Setting/ • The default setting is ON.
Procedure
(4) Timer Reservation TX Report
Functions • To set whether to print out the reservation TX or not.
Use • To print out the reservation TX.
Setting/ • The default setting is ON.
Procedure
408
"ON"
Daily "Every 100 Comm."
ON "If TX Fails"
"ON"
"ON"
Field Service Ver. 8.0 Jun. 2008
OFF
100/ Daily
OFF
OFF
OFF