Konica Minolta bizhub C650 Service Manual page 110

Field Service Ver. 8.0 Jun. 2008
[1] [2]
[2]
[2] [1]
[3]
A00JF2C051DA
[1]
A00JF2C052DA
[1]
A00JF2C053DA
3. Periodical check
7. Install the rail [1] on the main body
and secure it with two shoulder
screws [2].
NOTE
• Make sure that the protrusion (at
two places) on the rail is inserted
into the dowel holes [3] (at two
places) on the main body.
8. Grip the parts [1] of the transfer belt
unit and slide it out until it touches
the stopper [2] of the rail.
9. Change the way of holding the trans-
fer belt unit [1] as shown in the pic-
ture and remove it.
NOTE
• Do not touch the surface of the
transfer belt unit.
• Cover the transfer belt unit with
something such shade cloth to pro-
tect its surface from dust or foreign
matter.
57