Field Service Ver. 8.0 Jun. 2008
14.2 Mechanical adjustment of the paper feed section
14.2.1
Tray3/4 paper size change
This adjustment must be made in the following case:
• Upon user requests, the paper size used for the tray3/4 needs to be changed.
1. Pull out the tray where this adjustment is made.
[1]
[1]
[2]
[3]
[1]
[1]
A00JF2C401DA
[2]
[1]
A00JF2C402DA
14. Mechanical adjustment
2. Remove four screws [1] and remove
the paper guide plates (front [2]/rear
[3]).
3. Remove two screws [1] and remove
the end guide plates [2].
567