6. Other
6.3.33
IH coil (FH1)
• Tighten the screws of the lead wire terminal of the IH power supply fully to
the direction specified.
The terminal leakage may cause fire.
A: The harness with the longest orange color (blue color for bizhub C650) is installed with the M4
screw.
B: The harness with orange color (blue color for bizhub C650) is installed with the M4 screw.
C: The harness with orange color (blue color for bizhub C650) is installed with the M3 screw.
D: The harness with gray color is installed with the M3 screw.
4
E: The harness with black (100 V areas) / gray (200 V areas) color is installed with the M4 screw.
(Either harness can be connected with terminal E and F. )
4
F: The harness with black (100 V areas) / gray (200 V areas) color is installed with the M4 screw.
(Either harness can be connected with terminal E and F. )
1. Remove the fusing unit.
See P.60
2. Remove the IH power supply protective shield.
See the steps 1 to 12 of IH power supply removing procedure.
See P.183
138
4
Field Service Ver. 8.0 Jun. 2008
Warning
A
B
C
D
E
F
A00JF2C460DA