Incorrect Password - Xerox Phaser 6180MFP Service Manual

Error Messages and Codes

Incorrect Password

3-208
The DFAX password does not match with the Fax/Scan Lock password. The
following troubleshooting procedure applies to this error.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Scanner Controller Board, PL9.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the password setting:
>
Scan/Fax
2. Is the password correct?
1. Check the Scanner Controller Board
2
for correct installation. Reseat the
Scanner Controller Board
(page 8-99).
2. Does the error still occur when the
printer is turned On?
033-517: Incorrect Password (DFAX Password Error)
System
Admin Menu > Secure Settings
Lock.
Phaser 6180MFP Multifunction Printer Service Manual
Wiring and Plug/Jack Map References
Yes
Go to step 2.
>
Replace the
Scanner
Controller Board
(page 8-99).
No
Set the
password.
Complete.