Operating Mode - Xerox Phaser 6180MFP Service Manual

Operating Mode

Phaser 6180MFP Multifunction Printer Service Manual
The Phaser 6180MFP consists of the following operating modes:
Running Mode: The Printer, Scanner, and Fax communication operates
in the Print mode, Scan mode, and Fax mode respectively. More than one
of these three modes can exist concurrently.
Ready Mode: When the machine is turned On, it changes from the power
Off state to Ready mode. In this mode, the Copying, Fax Sending, and
Network Scanning features are available from the Control Panel. Fax
Receiving, Printing, PC Direct Fax, and Local Scanning are also
available).
Sleep Mode: The Printer enters into the Sleep mode to reduce power
consumption when it has not received data for the specified time.
Note
The transfer time from Ready mode to Sleep mode can be changed
via the Control Panel menu. Setting Range: 1 to 60 minutes.
Deep Sleep Mode (ENERGY STAR): The Printer automatically enters into
the Deep Sleep mode when Sleep mode has continued for the specified
time.
Note
The transfer time from the Sleep mode to Deep Sleep mode can be
changed via the Control Panel menu. Setting Range: 5 to 120
minutes. Off can be set.
Information listed in the table provides description and statuses of the printer
modes at various states.
Operating Modes
Mode Sub System
Running Mode
Printing Scanner
Control Panel
Scanner
Controller
Printer Controller Started condition
Print Engine
Engine Fan
General Information
State
N/A
Started condition
Started condition
Ready (The Fuser is On.)
In operation
1-25