Error Messages and Codes
3-66
Troubleshooting Procedure Table (continued)
Step
Actions and Questions
Check the Front Cover Harness for
5
continuity.
1. Disconnect P/J272 from the Right Side
Harness.
2. Disconnect P/J2721 from the Transfer
Unit.
3. Check continuity between P/J272 <=> P/
J2721.
1. Replace the Transfer Unit (page 8-9).
6
2. Does the error still occur when the printer
is turned On?
Yes
Go to step 6.
Replace the
MCU Board
(page 8-88).
Phaser 6180MFP Multifunction Printer Service Manual
No
Replace the
Front Cover
Harness.
Complete.