Preparation - Xerox Phaser 6180MFP Service Manual

Service Parts Disassembly

Preparation

8-4
Fuser
Transfer Unit
Duplex Unit
Tray 2
Before you begin any removal and replacement procedure:
1. Wear an Electrostatic Discharge wrist strap to help prevent damaging to
the sensitive electronics of the printer circuit boards.
2. Turn the printer power Off and disconnect the power cord from the wall
outlet.
3. Disconnect all computer interface cables from the printer.
4. Remove Tray 2.
5. Open the Front Cover.
6. Remove the following Maintenance Items and Consumables.
a. Transfer Unit (page 8-9)
Caution
Do not touch the Transfer Unit belt area.
b. Print Cartridges (page 8-11)
Caution
Do not expose the Print Cartridges to light for more than 5 minutes.
After removal, cover the Print Cartridges to minimize the amount of
light striking the Print Cartridges. Prolonged exposure to light
significantly reduces Print Cartridges performance.
c. Fuser (page 8-12)
Warning
The Fuser may be hot. Turn the printer power Off and allow at least 5
minutes for the Fuser to cool before removing the Fuser.
Print Cartridges
Tray 2 Retard Rollers
Phaser 6180MFP Multifunction Printer Service Manual
Feed Rollers
s6180mfp-204