Xerox Phaser 6180MFP Service Manual page 707

Phaser 6180MFP Multifunction Printer Service Manual
12. Remove 6 screws securing the MCU Board to the printer.
13. Remove the MCU Board.
P/J17 P/J14 P/J16
P/J15
P/J18
P/J22
P/J21
P/J25
P/J23
P/J27
Replacement Note Replacement Note
If the MCU Board is exchanged, simply move the NVRAM chip from
the old MCU Board to the new MCU Board.
Load the data from the I/P Board. Enter Service Diagnostics menu:
Service Mode >
Load NVM from
for detailed procedures.
P/J11
P/J12
P/J10
P/J19
NVRAM
P/J26
P/J24
P101
P/J31
Printer Diag > Engine Diag
ESS. Refer to "Loading NVM (NVRAM)" on page 6-7
Service Parts Disassembly
s6180mfp-317
> NVM Settings >
8-89