Xerox Phaser 6180MFP Service Manual page 476

General Troubleshooting
4-64
Black Toner Motor
Caution
When performing this procedure, remove and cover the Print Cartridges
to avoid exposure to light if the Front Door will be opened for prolonged
periods.
1. Enter the Service Diagnostic menu (page 4-5).
2. Open the Front Cover.
3. Remove the Transfer Unit (page 8-9).
4. Remove the Black Print Cartridge (page 8-11).
5. Use a paper clip to secure the Interlock Switch.
6. Perform the Black Toner Motor test:
Test > Black Toner
7. Verify that the Black Toner Motor is running and the gear is rotating.
8. Press the Stop button to stop the Black Toner Motor test.
9. Remove the paper clip from the Interlock Switch.
Printer Diag
Motor.
Phaser 6180MFP Multifunction Printer Service Manual
> Engine Diag > Motor
s6180mfp-184