Xerox Phaser 6180MFP Service Manual page 441

Phaser 6180MFP Multifunction Printer Service Manual
Printer Diag Test Table (continued)
Test Control Panel Display
Clear Job Clear JobHistory
History
OK?
Processing
Initialized
<Press the Exit button to
move one level up the
menu>
<Press the OK button to
run the test>
Clear Clear AuditronPV
Auditron PV
OK?
Processing
Initialized
<Press the Exit button to
move one level up the
menu>
<Press the OK button to
run the test>
Test Print Provides various test prints to be used for troubleshooting the
printer.
Menu Buttons
<Press the Up or Down button to switch from one item to another>
<Press the Exit button to move one/two level(s) up the menu>
<Press the OK button to run the test>
No Image IOT No Image IOT
Ready
Processing
Pattern IOT Pattern IOT
Ready
Processing
Grid 2 ESS Grid 2 ESS
Ready
Processing
Cyan 20% ESS Cyan 20% ESS
Ready
Processing
Magenta 20% Magenta 20% ESS
ESS
Ready
Processing
Yellow 20% Yellow 20% ESS
ESS
Ready
Processing
Black 20% ESS Black 20% ESS
Ready
Processing
General Troubleshooting
Test Description
Deletes the job history data.
Note: Job History can also be
initialized by Clear All NVM.
Initializes Auditron or Print Volume.
Print Volume and Auditron work
exclusively and share the setting
memory area.
When Auditron is enabled, user
account and restricted information is
cleared.
When Print Volume is enabled, Print
Volume Counter is initialized.
Note: AuditronPV can also be initialized
by Clear All NVM.
Prints a blank page.
Prints the printer built-in Test Pattern
600 DPI. This test checks the print
function of the printer.
Prints the Controller built-in grid
pattern. This test checks the print
function of the printer.
Prints 20% density paint pattern of
cyan on the whole page.
Prints 20% density paint pattern of
magenta on the whole page.
Prints 20% density paint pattern of
yellow on the whole page.
Prints 20% density paint pattern of
black on the whole page.
4-29