Fax Communication Error
Phaser 6180MFP Multifunction Printer Service Manual
The Fax did not read the document in manual transmission. The following
troubleshooting procedure applies to this error.
Applicable Chain Link
Chain Link
Read Manuscript Not Do)
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Scanner Controller Board, PL9.1.1
ADF Scanner Assembly, PL11.1.1
Troubleshooting Procedure Table
Step
Actions and Questions
1. Turn the printer power Off and back
1
On.
2. Does the error still occur when
faxing?
2
1. Replace the Scanner Controller
Board (page 8-99).
2. Does the error still occur when
faxing?
033-763: Fax Communication Error (Manual Transmission
Wiring and Plug/Jack Map References
Error Messages and Codes
Yes
No
Go to step 2.
Complete.
Replace the ADF
Complete.
Scanner
Assembly
(page 8-103).
3-203