Xerox Phaser 6180MFP Service Manual page 600

Adjustments and Calibrations
6-4
Manual Adjustment
Use the adjustment information in the following table to perform Color
Registration procedure.
Caution
After printing the Color Registration Correction Chart, DO NOT turn Off
the printer until the printer motor has stopped running.
Color Registration Adjustment
Color
Yellow
Magenta
Cyan
1. From the Control Panel, press the System button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find Maintenance. Press
the OK button.
4. Press the Up Arrow or Down Arrow button to find
Press the OK button.
5. Press the Up Arrow or Down Arrow button to find
OK button.
6. Select Yellow, Magenta, or
7. Use the Up Arrow or Down Arrow button to enter the values and press
the OK button to save the data.
8. Repeat steps 6 and 7 to continue adjusting the Color Registration.
9. Press the Exit button to access the
Color Regi Chart
10. Press the OK button again to print the
11. The Color Registration adjustment is complete when the straightest Y
(yellow), M (magenta), and C (cyan) lines are next to the "0" line.
Note
If "0" is not next the straightest lines, determine and adjust the values
again.
Range
-9 to +9
-9 to +9
-9 to +9
Cyan and press the OK button
Color Regi Chart
and press the OK button.
Color Regi
Phaser 6180MFP Multifunction Printer Service Manual
Default
0
0
0
Admin Menu. Press
Adjust ColorRegi.
Color Regi. Press the
menu. Select
Chart.