Chain Link Definition - Xerox Phaser 6180MFP Service Manual

Error Messages and Codes

Chain Link Definition

3-6
For Chain Link codes, Chain number (0 to 999) and Link number (0 to 999)
are assigned.
Chain Number – Indicates target feature area. The Chain Number is
assigned based on Chain Number numbering guide.
Link Number - Assigned based on Link Number numbering guide. The
Fault type is defined by the Link Number.
The following table contains Chain Link definition for the Phaser 6180MFP.
Chain Link Definition for Printer
Chain Fail Group
010
016
018
024
041
042
061
071
072
075
077
092
093
094
116
117
142
Chain Link for Scanner Controller
Chain Fail Group
005 ADF
016
017 Notice
117 System Fail
033 Job Fail
Link Definition
310~ Fuser
500~ Controller (ESS)
310~ Network Connect
310~, 910~ Controller (IOT)
310~ IOT
310~, 700~ IOT Fan Motor
310~ IOT (ROS)
100~ Tray 2
100~ Tray 3
100~ Tray 1 (MPT)
210~, 900~ Undefined Tray
600~ IOT (Sensor
310~, 910~ IOT (Developer, Print Cartridge,
CRUM)
310~, 910~ IOT (Transfer Unit)
310~, 910~ Controller (ESS)
310~ Controller (AIOC)
700~ IOT (Drive)
Link Definition
100~, 301~ ADF
500~ Controller (ESS)
910~ Controller (AIOC)
310~ Controller (AIOC)
500~, 700~ Controller (Fax)
Phaser 6180MFP Multifunction Printer Service Manual