Xerox Phaser 6180MFP Service Manual page 407

Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the fax cable connection for
1
correct installation. Reconnect the
fax cable on the Scanner Controller
Board.
2. Does the error still occur?
2 1. Check the fax protocol:
Information Pages
Monitor.
2. Does the sending fax meet the
specifications?
3 1. Check the country setting:
Admin Menu >
Country.
2. Is the country setting correct?
1. Check Scanner Controller Board for
4
correct installation. Reseat the
Scanner Controller Board
(page 8-99).
2. Does the error still occur when
faxing?
Yes
Go to step 2.
System > Go to step 3.
> Protocol
System > Go to step 4.
Fax Settings >
Replace the
Scanner
Controller Board
(page 8-99).
Error Messages and Codes
No
Complete.
Change the
sending fax side
setting.
Set the correct
country setting.
Complete.
3-219