Xerox Phaser 6180MFP Service Manual page 565

Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
1. Check for any debris on the
4
document glass and the CVT
window.
2. Are there any debris?
5 1. Check the Scanner Controller Board
wiring harness connectors P/J64
and P/J65. Reseat the connectors.
2. Does the image quality improve?
1. Check the Print Cartridge (C/M/Y/K)
6
for damages.
2. Is the Print Cartridge damaged?
1. Check the Transfer Unit.
7
2. Are there any damages on the
Transfer Unit surface?
8 1. Check the Transfer Unit for correct
installation. Reseat the Transfer Unit
(page 8-9).
2. Does the image quality improve?
1. Verify the media type selection:
9
System > Tray Settings
(MPT)/Tray 2/Tray 3
2. Does the media selection have the
correct type?
1. Check the Fuser for correct
10
installation. Reseat the Fuser
(page 8-12).
2. Does the image quality improve?
Print-Quality Troubleshooting
Yes
Remove the
debris.
Complete.
Replace the
Print Cartridge
(page 8-11).
Replace the
Transfer Unit
(page 8-9).
Complete.
Go to step 10.
> Tray1
> Paper Type.
Complete.
No
Go to step 5.
Go to step 6.
Go to step 7.
Go to step 8.
Go to step 9.
Set the correct
media type.
Replace the
Fuser
(page 8-12).
5-39