Xerox Phaser 6180MFP Service Manual page 518

General Troubleshooting
4-106
Troubleshooting Procedure Table (continued)
Step Actions and Questions
1. Check the Duplex Unit for abnormal
7
noise.
2. Does the noise occur when feeding the
paper from the Duplex Unit?
8 1. Check the Duplex Unit for correct
installation. Reseat the Duplex Unit
(page 8-115).
2. Does the noise still occur?
1. Perform the Tray 2 Motor test
9
(page 4-56): Service Mode
Diag > Engine Diag
Duplex Motor.
2. Does the noise still occur?
10 1. Check the ADF.
2. Does the noise occur when feeding the
paper from the ADF?
1. Check the document.
11
2. Does the document meet the ADF
specifications?
1. Check the ADF Feed Roller and ADF
12
Separator Pad.
2. Are the parts damaged or are there any
contaminations on the parts?
1. Check the Fuser for correct installation.
13
Reseat the Fuser (page 8-12).
2. Does the noise still occur?
1. Check the Transfer Unit for correct
14
installation. Reseat the Transfer Unit
(page 8-9).
2. Does the noise still occur?
15 1. Check the Print Cartridges for correct
installation. Reseat the Print Cartridges
(page 8-11).
2. Does the noise still occur?
1. Check the Main Drive Assembly for
16
correction installation. Reseat the Main
Drive Assembly (page 8-75).
2. Does the noise still occur?
17 1. Check the Feed Drive Assembly for
correct installation. Reseat the Feed Drive
Assembly (page 8-78).
2. Does the noise still occur?
Yes
Go to step 8.
Replace the
Duplex Unit
(page 8-103).
Replace the
> Printer Duplex Unit
> Motor Test > (page 8-103).
Go to step 11. Go to step 13.
Go to step 12. Change the
Clean the
parts.
Go to step 14. Complete.
Go to step 15. Complete.
Go to step 16. Complete.
Go to step 17. Complete.
Go to step 18. Complete.
Phaser 6180MFP Multifunction Printer Service Manual
No
Go to step 10.
Go to step 9.
Complete.
paper type.
Replace the
ADF Feed
Roller
(page 8-110).