Xerox Phaser 6180MFP Service Manual page 825

Phaser 6180MFP Multifunction Printer Service Manual
Signal Line Name
PAPER EMPTY SENSED (L)
+3.3 VDC
REGI SENSED (L) +3.3 VDC Detects signal of the Registration area by the Photo
REGI CL ON (L) +24 VDC
FEED SOL ON (L) +24VDC
OHP LED
OHP SENSED (L) +3.3 VDC
TEMP.
TRAY2 MOT ON (X) +XX
VDC
TRAY2 MOT CLK
TRAY2 MOT ALARM
Plug/Jack and Wiring Diagrams
Description
Detects signal of the Tray 1 (MPT) by the Photo
Sensor (Tray 1 No Paper Sensor).
Sensor (Registration Sensor).
On/Off signal of the Registration Clutch.
On/Off signal of the Tray 1 (MPT) Feed Solenoid.
On/Off signal of the OHP LED Board (not used on
6180MFP).
Detects signal of the transparency sheet by the Photo
Sensor (OHP Sensor) (not used on 6180MFP).
Detects temperature data inside the printer.
Drives control signal of the Drive Assembly.
10-27