Abnormal Noise During Printing - Xerox Phaser 6180MFP Service Manual

Abnormal Noise During Printing

Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Reference Table
Applicable Parts
Retard Roll (Separator), PL2.1.7
Tray 2 Retard Roll, PL2.2.17
MPT Feed Roll, PL3.1.10
Metal Regi Roll, PL3.2.6
Rubber Regi Roll, PL3.2.7
Turn Roll, PL3.2.32
Tray 2 Feed Roll, PL3.2.53
Transfer Unit, PL4.1.1
Print Cartridge (C/M/Y/K),
PL5.1.17-20
Fuser, PL6.1.10
Main Drive, PL8.1.2
Drive Assembly, PL8.1.7
ADF Feed Roller & Pad, PL11.1.16
Duplex Unit, PL12.1.1
Optional 550-Sheet Feeder, PL13.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check Tray 1 (MPT).
2. Does the noise come from Tray 1 when
paper is fed from Tray 1?
1. Remove the paper from Tray 1.
2
2. Does the noise still occur?
1. Check the paper condition.
3
2. Replace the paper.
3. Does the noise still occur?
1. Check the Feeder for abnormal noise.
4
2. Does the noise come from the Feeder
while paper is feeding?
5 1. Remove the paper from Tray 2.
2. Does the noise still come from the
printer?
6 1. Replace the paper.
2. Does the noise still come from the
printer?
General Troubleshooting
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Go to step 3.
Replace the
Tray 1 (MPT)
Retard Holder
Kit
(page 8-38).
Go to step 5.
Go to step 6.
Replace the
Tray 2 Retard
Roller
(page 8-15).
No
Go to step 3.
Go to step 4.
Complete.
Go to step 7.
Complete.
Complete.
4-105