Xerox Phaser 6180MFP Service Manual page 42

General Information
1-10
Control Panel - Right Side
The right side of the Control Panel contains the Start, Stop, Error, Clear All,
Wake Up buttons, and Error LED.
1
2
Clear All
3
4
5
LED Indicators
LED State
Green
Flashing Green
Red
Flashing Red
Control Panel Shortcuts
Function
Enter Service Diagnostics
Reset Password to 0000
(used when the Control Panel menus
are locked)
Boot Controller Update
1. Wake Up button – This light is On in Power Saver
mode. Press the button to exit the Power Saver
Wake Up mode.
2. Clear All button – Clears job and returns to the
default main menu. All job settings are reset to
default when the button is pressed.
Stop
3. Stop button – Cancels the current Print, Copy, Scan,
or Fax job.
Start
4. Start button – Starts the Copy, Scan, or Fax job.
Error
5. Error – Red light indicates an error has occurred.
s6180mfp-382
Printer State
Ready to Print or in Power Saver mode
Processing print job
Error occurs, can be fixed by user
Error occurs, cannot be fixed by user
Phaser 6180MFP Multifunction Printer Service Manual
Buttons Pressed at Power On
Up + Down Arrow buttons
Menu
Up + Down + OK buttons