Options Errors; Feeder Error (Optional 550-Sheet Feeder) - Xerox Phaser 6180MFP Service Manual

Options Errors

550 Feeder Error (Optional 550-Sheet Feeder)

Phaser 6180MFP Multifunction Printer Service Manual
The Optional 550-Sheet Feeder has failed. The following troubleshooting
procedure applies to this error.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
MCU Board, PL9.2.13
Right Side Harness, PL10.1.12
Optional 550-Sheet Feeder, PL13.1.1
Feeder Unit Harness, PL13.3.3
Tray 3 Feeder Board, PL13.3.6
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the Optional 550-Sheet
Feeder for correct installation.
2. Is the Optional 550-Sheet Feeder
correctly installed?
Does the error still occur when the
2
printer is turned On?
3 1. Check the wiring harness
connectors P/J27, P/J273, and P/
J419 between the MCU Board and
the Tray 3 Feeder Board.
2. Are the connectors securely
connected?
4 Does the error still occur when the
printer is turned On?
072-215: 550 Feeder Error (IOT Option Feeder Failure)
Wiring and Plug/Jack Map References
"Map 2 - Laser Unit and Feeder" on
page 10-11
"Map 4 - LVPS and MCU Board" on
page 10-13
"Map 6 - Optional 550-Sheet Feeder" on
page 10-15
"Optional 550-Sheet Feeder Wiring
Diagram" on page 10-45
Error Messages and Codes
Yes No
Go to step 3. Reseat the
Optional 550-
Sheet Feeder
(page 8-116).
Go to step 2.
Go to step 3. Complete.
Go to step 5. Reconnect the
connectors.
Go to step 4.
Go to step 5. Complete.
3-89