Xerox Phaser 6180MFP Service Manual page 377

Phaser 6180MFP Multifunction Printer Service Manual
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Scanner Controller Board, PL9.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1. Turn the printer power Off and back
1
On.
2. Does the error still occur?
1. Check the Country setting
2
information on the Control Panel:
System > Admin Menu
Settings > Country.
2. Is the Country setting correct?
1. Check the Scanner Controller Board
3
for correct installation. Reseat the
Scanner Controller Board
(page 8-99).
2. Does the error still occur when the
printer is turned On?
Error Messages and Codes
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Go to step 3.
> Fax
Replace the
Scanner
Controller Board
(page 8-99).
No
Complete.
Change the
Country Setting
to the correct
country.
Complete.
3-189