Fax Communication Error - Xerox Phaser 6180MFP Service Manual

Error Messages and Codes

Fax Communication Error

3-202
The Fax has failed to received transmission signal. The following
troubleshooting procedure applies to this error.
Applicable Chain Link
Chain Link
Receive Refuse)
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Scanner Controller Board, PL9.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the Fax setting:
1
Admin Menu
Fax
2. Is Junk Fax Filter On?
2 1. Check the Scanner Controller Board
for correct installation. Reseat the
Scanner Controller Board
(page 8-99).
2. Does the error still occur?
033-762: Fax Communication Error (DM Prevention Function
Wiring and Plug/Jack Map References
System >
> Fax Settings > Junk
Filter.
Phaser 6180MFP Multifunction Printer Service Manual
Yes No
Complete. Go to step 2.
Replace the Complete.
Scanner
Controller Board
(page 8-99).