Xerox Phaser 6180MFP Service Manual page 442

General Troubleshooting
4-30
Printer Diag Test Table (continued)
Test Control Panel Display
CMY 20% ESS CMY 20% ESS
Ready
Processing
Gradation ESS Gradation ESS
Ready
Processing
Parameter Reads/writes the parameter values, errors, and life counter values
stored in the printer.
Menu Buttons
<Press the Up or Down
button to move from one
item to another or
change the value>
<Press the Exit button to
move to one/two level(s)
up the menu without
saving the value>
<Press the OK button to
run the test or the value
in NVM and move one
level up the menu>
Slow Scan KtoP Slow Scan KtoP
-128 *
:
127 *
Slow Scan Slow Scan 600M
600M
-30 *
:
30 *
Slow Scan Slow Scan 600Y
600Y
-30 *
:
30 *
Slow Scan Slow Scan 600C
600C
-30 *
:
30 *
Slow Scan Slow Scan 1200M
1200M
-60 *
:
60 *
Slow Scan Slow Scan 1200Y
1200Y
-60 *
:
60 *
Test Description
Prints 20% density paint pattern of
cyan, magenta, and black combined on
the whole page.
Prints a pattern in which the density of
each cyan, magenta, yellow, or black is
varied from 0~100%.
Note: After the setting has been
changed, the "*" at the right end
disappears.
Sets registration in the paper feeding
direction.
Note: When the value is minimum or
maximum, pressing the Up or Down
button does not change the value.
Adjusts the registration in the paper
feeding direction.
Phaser 6180MFP Multifunction Printer Service Manual