Fax Shield Box Assembly (Pl9.1.4) - Xerox Phaser 6180MFP Service Manual

Service Parts Disassembly

Fax Shield Box Assembly (PL9.1.4)

8-96
1. Remove the Rear Cover (page 8-18).
2. Remove the Bottom Cover (page 8-19).
3. Remove the Left Pole Inner Cover (page 8-24).
4. Remove the Left Pole Cover (page 8-25).
5. Remove the Controller Shield Box Assembly (page 8-92).
6. Disconnect all the Scanner Controller Board (PL9.1.1) connectors.
6 connectors: P/J50, P/J52, P/J60, P/J61, P/J62, P/J63
2 flat cables: P/J64, P/J65
7. Remove 1 screw (6 mm) securing the ground wire of the ADF Scanner
Assembly (PL11.1.1) to the Fax Shield Box Assembly.
8. Release the wiring harnesses from the Clamps.
P/J65
P/J52
P/J50
P/J62
P/J64
P/J63
P/J53
P/J48
Phaser 6180MFP Multifunction Printer Service Manual
Clamps
P/J61
P/J60
s6180mfp-323