Programming QuickQ
GCA70-271
Preparing System Layout / Worksheets
Prepare the system manager's programming worksheet before you actually configuring the system at the
console, and use this worksheet as a reference to assist you in entering the information required over the
following pages. There is an example worksheet in Appendix B.
Programming The System Level Configuration
Performing Initial Sign In
Use the following steps to gain access to the system.
1. Press
to close the QuickQ Status window (Figure 3-1).
Esc
Figure 3-1 QuickQ Status Window
2. On the main system window, select the Si g n- I n menu bar option. Either move the pointer to it and
click the left mouse button, or hold down the
key and press the
key (Figure 3-2).
Alt
S
Figure 3-2 Sign In Window
3-2 Programming The QuickQ System