Figure 5-2. Viewing The System Access Window; Signing Into The Technician Access Level - Comdial DXP Plus Manual

IMI66–109, Section Five

Signing Into The Technician Access Level

Use the following procedure to access QuickQ's technician programming level.
Select the Sign-in menu bar option. Hold down the ALT key and press the S key or press the ENTER key with
1.
Sign-in highlighted. The system access window will open with the highlight in the ID# box, a default value of
100 will also be in the ID# box. See Figure 5-2 for an illustration of this.
Type the technician's ID number (default 832) and
2.
press the ENTER key. The highlight will move to
the password box.
5 – 2 Setting Up The Personal Computer

Figure 5-2. Viewing The System Access Window

Setting Up The Personal Computer
3. Type the technician's password (default 832) and
press the ENTER key. The supervisor/manager
sign-in window will appear (see Figure 5-3).
NOTE: The system hides the password digits when
you type them.