Transfer Recall; Unsupervised Conference - Comdial DXP Plus Manual

DXP Plus General Description
Using Voice Mail With Tracking
When a caller reaches an extension with an assigned Tracker pager, and that extension is covered by
proprietary voice mail, the system may prompt the caller to either select the assigned Tracker pager or
leave a message. If the caller selects the Tracker pager, the system places the call in a page orbit, and
displays that page orbit number on the user's Tracker pager. The user retrieves the call by dialing the
number of the page orbit containing the call. After a pre-programmed time-out, the call is returned to the
proprietary voice mail where the caller can leave a message.
Accessing The Tracker Pager From DISA
The Tracker Paging System is accessible from DISA by using the DVA voice messages.
Programming Options
There are three levels of programming associated with Tracker operation.
The installer or programmer performs the DXP system level using a PC. Programming at this level
installs Tracker operating parameters and pager-to-intercom assignments that can only be changed at this
programming level.
The PC attendant level of programming, available when the PC attendant position is installed, operates in
one of two modes–local or system. In the local mode, the attendant assigns pagers to intercoms and
selects pager types. This programming is transparent to the DXP system and does not alter any Tracker
programming done at the DXP system level. In the system mode of operation, all Tracker operating
parameters and pager-to-intercom assignments are as programmed into the DXP system by the installer or
system programmer.
The system manager level of programming allows the system administrator to use a programming station
to select a Tracker base station and enable or disable the Tracker Paging system.
Transfer/Conference Button
Each multiline telephone and proprietary multiline telephone provides a fixed button that gives quick,
easy transferring and conferencing of calls.

Transfer Recall

Refer to the discussion titled Timed Recall.
Transfer Ring Cadence
A telephone user can select the ringing cadence that announces a transferred line call. They have two
choices as follows: one cadence provides a 2 sec. on—4 sec. off tone, the other cadence provides a 0.5 sec
on—5.5 sec. off tone. The programmer can choose either cadence as the default setting.
U
Unscreened Call Transfer
Refer to the discussion titled, Call Transfer - Unscreened With Automatic Camp-On.

Unsupervised Conference

Refer to the discussion titled Conferencing - Multiline.
GCA40–130
Understanding The Features – 111