Pulse/Tone Switchable; Recall/Flash (Tap); Release Button; Reminder Alert - Comdial DXP Plus Manual

DXP Plus General Description

Pulse/Tone Switchable

If the installation site is in an area that supplies rotary (pulse) dialing lines from the central office instead
of, or in addition to, tone (DTMF) dialing lines, the programmer can match the dialing mode of the line
port to that of the line. If a rotary dial line is matched, further programming action matches the system
with the pulses-per-second rotary dial signaling of the line. The system defaults the line ports to match
tone dialing lines.
On those occasions when a user needs to send DTMF tones after making a call on a rotary line (to
generate banking-by-telephone codes for instance), he or she can dial a # to convert the dialing mode to
tone for the duration of the present call. The system changes it back to pulse when that call is completed.
Q
Quick Transfer
The quick transfer feature allows users to perform an automatic screened or unscreened transfer of an
incoming line call without pressing their telephone's TRANS/CNF button. The transfer occurs
automatically as soon as the user who answers the call dials the intercom number or access code for the
transfer location. The system begins the call transfer process as soon as the user dials a digit on his or her
dial pad, and effects the transfer as soon as the user hangs up or presses his or her telephone's RELEASE
button. When installers activate this feature, it greatly reduces the keystrokes that users must take to
transfer calls over a tie line.
R
Recall
Refer to the discussion titled Timed Recall.

Recall/Flash (TAP)

Refer to the discussion titled TAP (Flash)/Recall.
Relays
Refer to the discussion titled Auxiliary Ringer Interface.

Release Button

When a telephone is mapped with this button and a user presses it, the system discontinues the current
active operation and returns the station to an idle state. When used along with an answer button, the
release button provides rapid call handling.
Also refer to the discussions titled Database Program Storage and Password Protection.

Reminder Alert

A user can set up to two reminder alerts to sound at his or her telephone. The alert sounds at the station as
four short tone bursts, which continue until the user responds to the alert by pressing CLEAR. This
feature only works on digital stations that have interactive buttons.
GCA40–130
Understanding The Features – 95