Pbx/Centrex/Central Office Compatible; Personal Intercom Number; Personal Intercom Number Preference; Pooled Line Access - Comdial DXP Plus Manual

DXP Plus General Description

PBX/CENTREX/Central Office Compatible

System features and programmable buttons support the requirements of most PBXs, Central Offices, and
CENTREX systems. Users can make numbers, #, , programmable pauses, and flash signals a part of
every stored number for access to host system feature codes.
PC Attendant
Refer to Attendant Position, PC.
Periodic Line Tone
This feature provides periodic warning tones to station users while they are busy on certain lines. The
warning tone consists of one 500 ms burst, a 100 ms off period, and one100 ms burst. The tone reminds
the users to keep their conversations short on these lines. The system programmer can enable this feature
for a class of service of telephones and then specify the applicable lines. Further, he or she can select how
often the tone sounds.

Personal Intercom Number

Refer to the discussion titled Intercom Number.

Personal Intercom Number Preference

When a telephone goes off-hook, the system automatically connects it to the personal intercom number
assigned to the station.
Personalized Ringing Tone
This feature allows a station user with certain model telephones to choose one of several different ring
tones to aid in distinguishing one ringing station from another.

Pooled Line Access

Refer to the discussion titled Line Group Access.

Power Failure Transfer

A power failure line connection is available on each line interface board for connecting industry-standard
telephones such as a Comdial ATC or MaxPlus model. The system automatically connects these
power-fail telephones directly to certain lines whenever there is an AC power failure. During a power
failure, users can originate and receive calls on a power-fail station. The power-fail stations automatically
disconnect as soon as power is restored.
Preselection
This feature provides an override to the automatic line preference. If a station user presses a line button
on his or her telephone before lifting the handset, the station will go off hook on the selected line.
Prime Line
With this feature, a station automatically selects a line, line group, or intercom number for use when the
user takes it off hook. The feature can be over-ridden if the user preselects another line, line group, or
intercom number before lifting the handset. If the prime line is ringing, it is automatically answered when
the user lifts the handset—this feature can be used along with ringing line preference functions. Also
see—Ringing Line Preference.
GCA40–130
Understanding The Features – 93