Single-Line Proprietary Telephone Support; Smda Reports; Speakerphone Support - Comdial DXP Plus Manual

DXP Plus General Description

Single-Line Proprietary Telephone Support

The system supports a proprietary single-line telephone. The single-line telephone provides basic
intercom service coupled with the ability to access outside lines and system features through special
access codes. The programmer identifies the station port for single-line telephone use.

SMDA Reports

The system will automatically provide an SMDA report whenever the costed call storage reaches 95
percent of capacity. The programmer can arrange the system to print the reports automatically at a
specific time in the order that they are specified. The attendant can view the number of free records or
delete all stored records. Deleting all stored records insures that the system is storing only the latest
SMDA reports and provides a known starting point for record storage. Also, the installer can use the
programming terminal to view the number of free records and delete all the stored records. Any call
records created between the time the report printout was started and completed will not be printed or
deleted. If the reports are not deleted after they are printed, a later command to delete records will delete
all records at that point and not just the ones that were printed in the previously generated reports. The
programmer can arrange for the system to always delete the records after they have been printed. The
attendant can request particular reports at any time they are required.
If the programmer arranges the system to use account codes, they can be used to identify calls by category
or by any other desired grouping so that costing by that category or grouping can be reported.
There are four different Station Message Detail Accounting reports.
•
Detailed report sorted by stations
•
Detailed report sorted by account codes
•
Line summary report
•
A general output of all records
SMDA Reports—Call Costing / Hold Time
The programmer can also choose between call costing reports and hold time display reports. The hold
time display feature reports the accumulated time a line has been on hold; call costing reports the
estimated cost of the call.

Speakerphone Support

The optional speakerphone provides handsfree operation of all features.
Speed Dial Sets
Refer to the discussions titled System Speed Dials and Station Speed Dials.
GCA40–130
Understanding The Features – 99