Configuration Backup - Comdial DXP Plus Manual

Programming QuickQ
3. Use the Backup button to send the current DVA messages to the floppy disk. The Restore button
retrieves the DVA messages from the floppy disk to the hard drive.
Note: Use the key to move from the Backup button to the R e s t o r e Button. The messages
Tab
are backed up to the 3.5–inch.floppy disk drive in the DVA, not the floppy disk drive in
the call processor-Install the correct floppy disk in the DVA drive before you start a
backup or restore action.

Configuration Backup

1. Select Configuration Backup on the System-Backup pull down menu. The System Program
Back-up/Restore window appears. Refer to Figure 3-18.
2. Select the B a c k up button to send the current System Programs to the floppy, disk. The Back up to
Floppy window appears with Yes and No option. To initiate the backup process, press
your mouse to click on
3. To restore System Programs, select the Restore button. The Restore Window, appears with two
options: Continue and Cancel. Selecting continue resets the system before the data is restored.
3-22 Programming The QuickQ System
Yes .
Figure 3-18. System Program Back-up/Restore Window
GCA70-271
Alt Y or use