Figure 5-1. Viewing The Error Window; Section 5 Setting Up The Personal Computer; Using Quickq With A Keyboard; Performing Initial Programming For Quickq - Comdial DXP Plus Manual

Setting Up The Personal Computer
Follow the information that Sections 2 and 3 provide for installing and wiring the QuickQ system. Then refer to
this section to set up the computer hardware and perform the initial programming required for the QuickQ system.

Using QuickQ With A Keyboard

You can use either a keyboard or a mouse to access
the QuickQ. It is a good practice to use the keyboard
for programming until you become comfortable using
a mouse. For instruction on using a mouse and the
QuickQ, refer to Appendix 1 page A1-1.
There are five keys that can be used in place of a
mouse.
TAB Press to highlight a word (or item) and
move the cursor. Press Shift-TAB to
move the highlight backward.
ENTER
Press when you require a specific word
(or item) once you have highlighted it.
Press to close a message or error window.
ESC Press to close a message or error window
or to close the current window.

Performing Initial Programming For QuickQ

If you switch the QuickQ on without having first
programmed the voice port extension numbers into the
QuickQ software, an error window will open with an
appropriate error message.
Section 5
Setting Up The Personal Computer

Figure 5-1. Viewing The Error Window

ARROW Press to move the cursor.
ALT Press and hold while typing an underlined
letter to open a window. For example, to
access the sign-in menu you can press and
hold ALT and then type S. The ALT key
will move the control from a window
back to the menu title bar without closing
the window.
F1 Press to cause a help window to appear.
CAUTION
Do not press PRINT SCREEN or PAUSE
while using QuickQ . Pressing either of
these keys could cause QuickQ to stop
operating.
See Figure 5-1 for an illustration of this window.
Press the ENTER key to continue with the initial
programming of QuickQ. Press ESC to close QuickQ
Status.
Setting Up The Personal Computer 5 – 1
IMI66–109, Section Five