Serial Port - Comdial DXP Plus Manual

Installing The Serial Data Modem
In The DXP Plus Digital Communications System
1.1 Understanding The Modem
The serial data modem allows remote servicing and programming of the DXP Plus digital communications
system. The DXMDM is a general-purpose, Hayes*-compatible, serial data modem that receives its operating
power and configuration programming from the DXP Plus. The modem's operating parameters appear in the
following chart.
* Hayes is a registered trademark of Hayes Microcomputer Products
BPS Out BPS In
2400
This manual has been developed by Comdial Corporation (the "Company") and is intended for the use of its customers and service personnel. The information in this manual is subject to change
without notice. While every effort has been made to eliminate errors, the Company disclaims liability for any difficulties arising from the interpretation of the information contained herein.
The information contained herein does not purport to cover all details or variations in equipment or to provide for every possible contingency to be met in connection with installation, operation, or
maintenance. Should further information be desired, or should particular problems arise which are not covered sufficiently for the purchaser's purposes, contact Comdial, Inside Sales Department,
Charlottesville, Virginia 22906.
Printed in U.S.A.
Data Bits
2400 8
Power
Cord
S t a
t u s
P W
R
S E
R I A
L
L i n
e
Detailing The Serial Data Modem
Stop Bits Parity
1 None

Serial Port

Cord
R
Flow Control
None
PLUS013
IMI89-185.01
7/95