Figure 5-10. Viewing The Printer-Setup Window; Programming The Quickq Printer Information - Comdial DXP Plus Manual

IMI66–109, Section Five

Programming The QuickQ Printer Information

Use the following steps to program the information required by QuickQ to allow it to print to the data printer.
After you have opened the technician access level,
1.
select the system-setup option. Hold down the
ALT key and press the Y key or highlight the
system set-up and press the ENTER key. The
system-setup options will open.
To select the printer setup option, press the up or
2.
down arrow key to highlight the printer setup
option and press the ENTER key. The printer
setup window will open with the highlight under
the printer type selections. See Figure 5-10 for
details.
3. To select the printer type, press the up or down
arrow keys to highlight required printer and press
the TAB key to select it. The highlight will move
to the printer port selections.
5 – 10 Setting Up The Personal Computer
Figure 5-10. Viewing The Printer Setup Window.
Setting Up The Personal Computer
CAUTION
To ensure reliable printout results, only
use those data printers that the menu lists.
Data printers other than the ones listed on
the menu may not interface properly with
the QuickQ software.
To select the printer port, press the up or down
4.
arrow keys to highlight the required port and press
the TAB key to select it. The highlight will move
back to the printer type selections.
To save the printer parameters, press and hold the
5.
ALT key and press the S key. The save printer
configuration? window will open with a Yes No
option.
6. To select the Yes option, either press the TAB key
or press the left arrow key to highlight Yes and
press the ENTER key.