Consoleless Operation; Consultation Hold; Copy Model - Comdial DXP Plus Manual

DXP Plus General Description

Consoleless Operation

The system can operate with or without the use of an attendant console.

Consultation Hold

When the station user presses the TRANS/CONF button while on a call, the call is placed on consultation
hold and dial tone is returned to the station. The user may then make another intercom or line call. After
speaking with this "consulted" party, the station user may do any of the following: (1) return to the held
call by selecting the line or intercom number for the held party, (2) effect a conference by pressing the
TRANS/CONF button (putting the held call, the consulted party and the station user in conference), (3)
hang up and effect a transfer of the held party to the consulted party. If the user encounters a busy or a
ring no-answer, he or she may press the TAP button to return to the held party.
Transfer considerations:
•
The system default denies line-to-line transfers.
•
To make an unscreened or blind transfer, press the TRANS/CONF button, dial the desired intercom
number, and hang up.

Copy Model

Refer to the discussion titled Block Programming.
GCA40–130
Understanding The Features – 63