Station Speed Dial; Station Name - Comdial DXP Plus Manual

GCA40–130

Station Name

The installer can assign a display name and a full name to a station. A display name is composed of a
maximum of seven characters and shows in the display of an LCD speakerphone as a identification aid. A
full name is composed of a maximum of 20 characters and shows in some voice mail and open
architecture interface applications. The installer can compose a valid name from any alpha-numeric
character; however, the first character of a display name must be an alphabetic character.

Station Speed Dial

Station speed dialing is a feature that lets the user dial lengthy numbers using one or two buttons, store
frequently used feature dialing codes, and store intercom extension numbers of frequently called
telephones. The user can store speed dial numbers at any unused programmable button, or if the
programmer assigns a shift button to a telephone, or one exists as a fixed feature button, the user can store
a speed dial number at a second level under any programmable button.
Speed dial buttons can store up to 16 digits, Plus trunk or intercom number selection. Stored digits
include 0-9, and #. A pause is stored at any point where the HOLD button is pressed, and a hookflash
is stored at any point where the TAP button is pressed. Also refer to the discussion titled Automatic
Pause Insertion.
There are two levels of storage on speed dial buttons. To access the second level, the user must press the
programmed SHIFT button. The shift mode is then active for five seconds after the SHIFT button is
pressed. If a SHIFT button is not available, the user has access to only one level of speed dial storage.
A speed dial set is a group of 10 speed dial locations. The DXP Plus system allocates one speed dial set
to each telephone as a default but can allocate up to 10 sets to a telephone if a programmer makes it so.
When a DSS/BLF Console is operated as a companion to a telephone, the programmer must allocate it's
speed dial sets at the companion telephone to be shared with the console. The total system speed dial
allocation that is available is 960 sets or 9600 individual speed dial locations.
Station Transfer Recall
Refer to the discussion titled Timed Recall.
104 – Understanding The Features
DXP Plus General Description