IMI66–109, Section Five
Setting Up The Personal Computer
Detailing The QuickQ Batch Files
This section details several batch files that are crucial to QuickQ operation.
The contents of the CONFIG.SYS file are shown in the following list.
DEVICE=C:\QEMM\DOSDATA.SYS
DEVICE=C:\QEMM386.SYS FRAME=NONE RAM NOEMS
DEVICE=C:\QEMM\DOS-UP.SYS @C:\QEMM\DOS-UP.DAT
DOS=HIGH
FILES=40
SHELL=C:\QEMM\LOADHI.COM /R:2 C:\DOS\COMMAND.COM C:\DOS\ /P
BUFFERS=40,0
BREAK=ON
The contents of the AUTOEXEC.BAT file with Close-Up software are shown in the following list.
@echo off
prompt $p$g
PATH C: \DOS;C:\;C:\quickq;C:\qemm;
loadhi c: \mouse\mouse
loadhi c:\closeup6\chostl comx combase=3e8 comirq=5 Noterm
cd\quickq
delay 120
IF ERRORLEVEL 1 GOTO EXIT
quickq
:EXIT
The contents of the AUTOEXEC.BAT file without Close-Up software are shown in the following list.
@echo off
prompt $p$g
PATH C: \DOS;C:\;C:\quickq;C:\qemm;
loadhi c: \mouse\mouse
REM loadhi c:\closeup6\chostl comx combase=3e8 comirq=5 Noterm
cd\quickq
delay 120
IF ERRORLEVEL 1 GOTO EXIT
quickq
:EXIT
5 – 12 Setting Up The Personal Computer