Introducing The QuickQ System
Understanding The Manual Organization
Section 1:
Introducing The QuickQ
System—Provides general information
on QuickQ and system requirements.
Section 2:
Installing The QuickQ
System—Provides site planning
considerations and instructions on the
mounting of the Digital Voice
Announcer (DVA).
Section 3:
Wiring The QuickQ System—Provides
wiring information for the voice
channels on the DVA, PC to DVA and
DXP to PC.
Section 4:
Programming The DXP Digital
Communications System—Provides the
Comdial programming requirements.
Section 5:
Setting Up The Personal
Computer—Provides the information on
the installation of the QuickQ software
Listing The Related Publications
Additional publications that are applicable to the QuickQ automatic call distributor and DXP digital
communication system include the following publications.
•
GCA70-271
QuickQ DXP System
Manager's Guide
•
GCA70-278
QuickQ DXP Agent's User Guide
•
GCA70-302
QuickQ DXP Supervisor's User Guide
Section 1
Introducing The QuickQ System
into the PC and the initial programming
of the QuickQ.
Section 6:
Reviewing The QuickQ
Components—Provides the description
of the QuickQ DVA components.
Section 7:
Testing and Troubleshooting—Provides
the test procedure to setup QuickQ and
provides information on troubleshooting
problems on QuickQ.
Section 8:
Installing The New Voice Channel
Cards—Provides information on how to
install additional cards.
Appendix 1: Using QuickQ With A
Mouse—Describes mouse usage with
the QuickQ system.
Appendix 2: Reviewing The QuickQ Programming
Road Map.
•
DXLIT-016
DXP Digital Communications System
System Reference Manual
•
DXLIT–028
DXP Plus Digital Communications
System Reference Manuals
Introducing The QuickQ System 1 – 1
IMI66–109, Section One