3.2
TWAIN driver
[Scan Mode]
Select the image quality of the original.
-
[Full Color]: Appropriate for color copying.
-
[Grey]: Appropriate for monochromatic copying.
-
[B/W (Photo)]: Appropriate for photography.
-
[Text]: Appropriate for documentation in general.
[Resolution]
Specify the print resolution.
If [Scan Mode] is set to [Full Color] or [Gray], [600 dpi e 600 dpi] is not displayed.
-
[150 dpi e 150 dpi]: Resolution good for standard character size. The resolution supports efficient scan-
ning.
-
[300 dpi e 300 dpi]: Resolution good for small character size. An initial setting is made for this resolution.
-
[600 dpi e 600 dpi]: High resolutions appropriate for landscapes and images of people.
[Scan Type]
A scanning method can be selected.
-
[Pull Scan]: Click the driver [Scan] button, then this machine starts scanning.
-
[Push Scan]: Press Start on the Control Panel, then this machine starts scanning.
[Image size]
Displays the size of the scanned image.
[LAN/USB]
Connection method can be selected.
-
If network is selected, an IP address can be set or changed by following procedures shown below:
1
Select [Network].
2
Enter an IP address to be newly registered or changed.
% Click [Search], then an IP addresses of devices connected to the network will be displayed. Select
the pertinent IP address, then click [OK].
3
When an IP address is set up, click [OK].
[About]
The version information screen appears.
[Scan]
Scan the original.
[Close]
Stops scanning.
[Clear]
Deletes images scanned using pre-scanning.
[Prescan]
Pre-scans the original and displays it in the pre-scan window.
bizhub 306/266
3
3-5