Middle Guide - Konica Minolta bizhub C203 Service Manual

3. Other
3.4.6

Middle guide

1. Remove the finisher unit.
See P.28
2. Remove the finisher unit rear cover.
See P.20
3. Remove the finisher unit upper cover.
See P.21
[1]
[1]
[3]
[5]
[6]
[1]
22
[2]
A01GF2C528DA
[2]
9J08F2C013DA
[4]
[2]
[3]
A01GF2C529DA
Field Service Ver. 1.0 Jul. 2007
4. Remove the harness bundle [1] from
three harness guides [2].
5. Remove the screw [1] and tab [2],
and remove the harness guide [3].
6. Remove the screw [1] and the
ground wire.
7. Remove the wire saddle [2] and
edge cover [3], and disconnect the
connector [4].
8. Remove the shoulder screw [5] and
remove the middle guide [6].