Printer Resist Loop - Konica Minolta Magicolor 8650 Service Manual

10. Service Mode
10.8.4

Printer Resist Loop

Functions • To set the correction value of the paper loop length for each process speed of tray 2,
tray 3 to tray 5 / LCT, tray 1, and duplex.
• To adjust the length of the loop formed in paper before the registration rollers.
• Use "Paper Passage" for paper passage check.
Use When a paper skew occurs.
When a paper misfeed occurs.
Adjustment To decrease the loop amount: Decrease the setting value
Instructions To increase the loop amount: Increase the setting value
Adjustment • The adjustable range is different depending on paper source and processing speed.
Range
166.6 mm/sec
55 mm/sec
1. Select [Service Mode] → [MachineAdjustment] → [Printer Resist Loop].
Setting/
Procedure 2. Select a paper source and a processing speed.
3. Enter the new setting from the
232
Confidential – for internal use only, do not distribute
Tray 2 Tray 3/4/5 LCT
-5 to +5 -5 to +5
-15 to +15 -15 to +15
and keys and press the Menu/Select key.
Field Service Ver. 2.0 Nov. 2007
Duplex Tray 1
-5 to +5 -5 to +5
-8 to +8 -15 to +15