10.4 Clear Counter; Yield Counter; Jam; Counter Service Called - Konica Minolta Magicolor 8650 Service Manual

Field Service Ver. 2.0 Nov. 2007

10.4 Clear Counter

10.4.1

Yield Counter

Functions • To clear the count of each counter.
Use • When each of the maintenance parts is replaced.
Setting/ • To clear the count of a counter, select the specific part and then select [Start] and
Procedure press the Menu/Select key.
• Tray 1
• Tray 2
• Tray 3
• Tray 4
• Tray 5
• LCT
• Finisher
10.4.2

JAM

Functions • To clear the count of each counter.
Use • To clear the number of paper misfeeds that have occurred.
Setting/
• Select [Start] and press the Menu/Select key.
Procedure
10.4.3

Counter Service Called

Functions • To clear the count of each counter.
Use • To clear the number of malfunctions that have occurred.
Setting/
• Select [Start] and press the Menu/Select key.
Procedure
10.4.4

Warning

Functions • To clear the count of each counter.
Use • To clear the number of warning conditions that have been detected.
Setting/
• Select [Start] and press the Menu/Select key.
Procedure
10.4.5

Counter for Mode

Functions • To display the printed pages in the following specified modes; printer. It also displays
the count value of using the specified mode.
Use • Use to clear the printed pages in the following specified modes; printer, as well as
No. of times each mode was used, in order to know the using condition.
Setting/
• Select [Start] and press the Menu/Select key.
Procedure
Confidential – for internal use only, do not distribute
: Number of sheets of paper fed from tray 1
: Number of sheets of paper fed from tray 2
: Number of sheets of paper fed from tray 3
: Number of sheets of paper fed from tray 4
: Number of sheets of paper fed from tray 5
: Number of sheets of paper fed from the LCT
: Number of sheets of paper fed out of the finisher
10. Service Mode
219