Punch Option Setting - Konica Minolta bizhub C353 Service Manual

6. Finisher operations
6.2

Punch option setting

1
• To set installation and model of the punch kit.
Functions
• To set the number of holes to be made by the punch kit installed.
Use • Use when the punch kit is installed.
• The default setting is Non-installat.
1. Touch [PK-515].
Setting/
2. Select the number of punch holes to be made corresponding to the model and destina-
Procedure
tion.
3. Touch [decision].
4. Turn off the main power switch and turn it on again more than 10 seconds after.
66
1
Field Service Ver. 3.0 Jan. 2008