Dodge Intrepid Service Manual page 714

LH
VALVE BODY (Continued)
(13) Install the stiffener plate (Fig. 444).
Fig. 444 Install Stiffener Plate
1 - STIFFENER PLATE
(14) Install the solenoid/pressure switch assembly
and to the transfer plate (Fig. 445) and torque to 6
N·m (35 in. lbs.).
Fig. 445 Solenoid Retaining Screws
1 - SOLENOID/PRESSURE SWITCH ASSEMBLY
2 - RETAINING SCREWS
(15) Install the manual shaft/rooster comb and
transmission range sensor to the valve body (Fig.
446).
Fig. 446 Manual Shaft/Rooster Comb and
Transmission Range Sensor
1 - TRANSMISSION RANGE SENSOR
2 - MANUAL SHAFT
3 - ROOSTER COMB
(16) Install the TRS/manual shaft retaining screw
(Fig. 447) and torque to 5 N·m (45 in. lbs.).
Fig. 447 Manual Shaft Retaining Screw
1 - SCREW
2 - TRS
(17) Install manual shaft seal.
TRANSAXLE 21 - 167