Dodge Intrepid Service Manual page 670

LH
INPUT CLUTCH ASSEMBLY (Continued)
Fig. 322 Install No. 3 Thrust Washer
1 - #3 THRUST WASHER (NOTE 5 TABS)
2 - UNDERDRIVE SHAFT ASSEMBLY
(40) Install the #3 thrust plate to the bottom of the
overdrive shaft assembly. Retain with petrolatum or
transmission assembly gel (Fig. 323).
Fig. 323 Install No. 3 Thrust Plate
1 - OVERDRIVE SHAFT ASSEMBLY
2 - DABS OF PETROLATUM (FOR RETENTION)
3 - #3 THRUST PLATE (NOTE 3 TABS)
(41) Install the overdrive shaft assembly (Fig.
324).
Fig. 324 Install Overdrive Shaft Assembly
1 - OVERDRIVE SHAFT ASSEMBLY
2 - #3 THRUST PLATE
3 - #3 THRUST WASHER
(42) Reinstall overdrive and reverse clutch as
shown (Fig. 325). Rechecking these clutch clear-
ances is not necessary.
Fig. 325 Input Clutch Assembly
1 - INPUT CLUTCH ASSEMBLY
2 - OVERDRIVE SHAFT ASSEMBLY
TRANSAXLE 21 - 123