Dodge Intrepid Service Manual page 659

21 - 112 TRANSAXLE
INPUT CLUTCH ASSEMBLY (Continued)
CAUTION: Compress return spring just enough to
remove or install snap ring.
(18) Using Tool 5059A and an arbor press, com-
press UD clutch piston enough to remove snap ring
(Fig. 278) (Fig. 279).
Fig. 278 UD Spring Retainer Snap Ring
1 - SNAP RING PLIERS
2 - ARBOR PRESS RAM
3 - SNAP RING
4 - SPECIAL TOOL 5059A
(19) Remove spring retainer (Fig. 279).
Fig. 279 UD Return Spring and Retainer
1 - UNDERDRIVE SPRING RETAINER
2 - SNAP RING
3 - SEAL
4 - PISTON RETURN SPRING
(20) Remove UD clutch piston (Fig. 280).
Fig. 280 Underdrive Clutch Piston
1 - PISTON
(21) Remove input hub tapered snap ring (Fig.
281).
Fig. 281 Input Hub Tapered Snap Ring
1 - INPUT SHAFT
2 - INPUT HUB SNAP RING (TAPERED SIDE UP WITH TABS IN
CAVITY)
3 - SNAP RING PLIERS
LH