Dodge Intrepid Service Manual page 805

23 - 68 INTERIOR
FLOOR CONSOLE
REMOVAL
(1) Remove shift knob.
(2) Remove floor console shift bezel.
(3) Remove side panels (Fig. 14), or (Fig. 15).
(4) Disconnect the electrical connectors.
(5) Remove fasteners attaching forward bracket to
instrument panel.
(6) Remove fasteners attaching bottom of console
storage bin to rear mounting bracket (Fig. 16).
(7) Remove floor console from vehicle.
INSTALLATION
(1) If power tap wire harness was removed reat-
tach the harness with tape, along the indicated
markings.
(2) If previously removed, install the power outlet
tap. (Refer to 8 - ELECTRICAL/POWER DISTRIBU-
TION/CIGAR LIGHTER OUTLET - INSTALLA-
TION)
(3) Place center console in position on vehicle.
(4) Install fasteners attaching forward bracket to
instrument panel.
1 - INSTRUMENT PANEL
2 - FASTENERS
Fig. 14 FRONT FLOOR CONSOLE SIDE PANELS - CONCORDE
Fig. 15 FRONT FLOOR CONSOLE SIDE PANELS
1 - INSTRUMENT PANEL
2 - FLOOR CONSOLE BEZEL
3 - POWER OUTLET/CIGAR LIGHTER CONNECTORS
4 - TRANSMISSION RANGE INDICATOR ILLUMINATION
CONNECTORS
5 - REAR END CAP
6 - FLOOR CONSOLE
7 - FRONT FLOOR CONSOLE PANEL
3 - CLIPS
4 - SIDE PANEL
LH