Crankshaft Oil Seal - Front Removal; Installation - Dodge Intrepid Service Manual

9 - 136 ENGINE 3.5L
CRANKSHAFT OIL SEAL -
FRONT
REMOVAL
(1) Remove the crankshaft sprocket. (Refer to 9 -
ENGINE/VALVE TIMING/TIMING
AND SPROCKETS - REMOVAL)
(2) Tap the dowel pin out of the crankshaft (Fig.
72).
Fig. 72 Crankshaft Dowel Pin - Removal/Installation
1 - PIN PUNCH
2 - DOWEL
(3) Remove crankshaft seal using Special Tool
6341A (Fig. 73).
CAUTION: Do not nick shaft seal surface or seal
bore.
(4) Shaft seal lip surface must be free of varnish,
dirt or nicks. Polish with 400 grit paper if necessary.

INSTALLATION

(1) Install crankshaft seal using Special Tool 6342
(Fig. 74).
(2) Install the dowel pin into the crankshaft to 1.2
mm (0.047 in.) protrusion (Fig. 72).
(3) Install the crankshaft sprocket. (Refer to 9 -
ENGINE/VALVE TIMING/TIMING
AND SPROCKETS - INSTALLATION)
BELT/CHAIN
Fig. 73 REMOVING CRANKSHAFT OIL SEAL WITH
1 - SPECIAL TOOL 6341A
Fig. 74 INSTALLING CRANKSHAFT OIL SEAL WITH
1 - SPECIAL TOOL 6342
BELT/CHAIN
SPECIAL TOOL
SPECIAL TOOL
LH